Club3D has added two new accessories to its lineup for August, and the standout is a USB4 NVMe enclosure built to push external SSDs to 40 Gbps. The Dutch connectivity specialist, which has been designing cables, docks and adapters since 1997, has paired the enclosure with a smaller dual-port wall charger aimed at travellers and cramped desks. Neither product reinvents the category, but both fill genuine gaps for anyone juggling fast storage and fast charging away from a full desktop setup.
Table of Contents
What the CAC-2510 USB4 NVMe enclosure brings to external storage
The CAC-2510 is a compact housing for a single M.2 NVMe SSD, and its main selling point is bandwidth. Club3D has built it around the USB4 standard, which supports data transfer up to 40 Gbps, double the ceiling of the USB 3.2 Gen 2×2 enclosures that have been common in this space for the past few years.
That extra headroom matters most for people moving large files regularly: video editors backing up raw footage, photographers offloading RAW files in bulk, or anyone running frequent full-system backups. A drive that can only manage 10 or 20 Gbps quickly becomes the bottleneck once a fast NVMe SSD is installed inside it, so an enclosure built for the full 40 Gbps ceiling lets the drive itself, rather than the connection, set the pace.
Club3D has not published exhaustive technical documentation for the CAC-2510 beyond confirming its USB4 NVMe enclosure design and transfer speed, so shoppers should check drive compatibility and cooling design once retail listings go live. Enclosures in this class typically rely on an internal heat spreader or a thin aluminium shell to keep NVMe drives from throttling under sustained load, and that detail tends to separate a good 40 Gbps enclosure from a merely adequate one.
How the specs compare on paper
| Product | Type | Key spec | Best suited for |
|---|---|---|---|
| Club3D CAC-2510 | USB4 M.2 NVMe SSD enclosure | Up to 40 Gbps transfer speed | Fast external backups, large file transfers |
| Club3D CAC-1935 | Dual-port wall charger | Compact form factor, high-speed power delivery | Travel, tight power boards, small desks |
How it stacks up against rival external SSD options
Club3D is not alone in chasing USB4 speeds. Samsung recently pushed into the same territory with Samsung’s own USB4 portable SSDs, while several boutique enclosure makers have already shipped 40 Gbps M.2 housings aimed at creators and enthusiasts. What sets an enclosure apart in this crowded field usually comes down to build quality, thermal handling and whether it ships as a bare shell or bundled with a drive.
The broader trend is worth noting too. USB4 ports are becoming standard on new laptops, including many machines that also support Thunderbolt, so an enclosure capable of hitting the full 40 Gbps ceiling is a safer long-term buy than one capped at older USB 3.2 speeds. Buyers with older laptops limited to 10 or 20 Gbps USB-C ports will still see a benefit from the CAC-2510, just not the full bandwidth advantage, since USB4 devices remain backward compatible with slower USB-C connections.
For anyone still deciding between an external enclosure and a pre-built portable SSD, the trade-off is flexibility versus convenience. An enclosure lets a buyer choose their own NVMe drive and capacity, while a sealed portable SSD is simpler but locks in the specification at purchase.
The CAC-1935 charger rounds out the release
The second product in Club3D’s August lineup is less flashy but arguably more broadly useful. The CAC-1935 is a dual-port wall charger designed to sit flush against a power board or wall socket without hogging neighbouring outlets, a common complaint with bulkier chargers.
Compact, high-output chargers have become a genuine trend over the past couple of years, largely thanks to gallium nitride components that let manufacturers shrink the casing without sacrificing power delivery. Club3D’s charger follows the same logic seen in other compact GaN wall chargers on the market, and sits in similar territory to similarly pocketable chargers already reviewed elsewhere.
Buyers weighing up whether a smaller charger can safely handle laptops as well as phones may also want to read up on how safe it is to mix charger types across devices, since output ratings and cable quality both play a part in getting reliable charging speeds.
What this means for buyers
Neither product is groundbreaking on its own, but together they reflect where accessory design is heading: faster storage in smaller housings, and more power squeezed into smaller chargers. For anyone building a portable editing kit or simply tired of carrying a laptop brick and a separate phone charger, the CAC-1935 offers a practical fix.
The CAC-2510, meanwhile, is the more significant release of the two. A properly built USB4 NVMe enclosure gives an ageing NVMe drive a new lease on life as fast external storage, and it future-proofs a purchase against the next generation of USB4-equipped laptops. Club3D has not detailed pricing or exact retail availability yet, so anyone interested should keep an eye on the company’s official channels for confirmation before the products land on shelves.
